Gzav's Wiki | RaspberryPi / Pc Duino

August 27, 2015, at 07:44 AM by 194.2.202.81 -

Deleted line 170:

echo "iface eth0 inet dhcp" >> /etc/network/interfaces

Added lines 172-173:

echo "allow-hotplug eth0" >> /etc/network/interfaces
echo "iface eth0 inet dhcp" >> /etc/network/interfaces

Added lines 176-177:

# config wiki : cf https://wiki.debian.org/WiFi/HowToUse#Command_Line

August 27, 2015, at 07:35 AM by 194.2.202.81 -

Changed lines 169-172 from:

echo "iface eth0 inet dhcp" > /etc/network/interfaces

to:

echo "auto lo" > /etc/network/interfaces
echo "iface lo inet loopback" >> /etc/network/interfaces
echo "iface eth0 inet dhcp" >> /etc/network/interfaces
echo "auto eth0" >> /etc/network/interfaces

August 27, 2015, at 07:27 AM by 194.2.202.81 -

Changed lines 7-8 from:

to:

* Config server ubuntu + GPIO : https://github.com/cjdaly/napkin/wiki/Server-on-pcduino

August 26, 2015, at 09:24 AM by 194.2.202.81 -

Added lines 329-331:

!! Réseau
* Configuration interface wifi : http://learn.linksprite.com/pcduino/quick-start/original-postpcduino-wireless-connection-dai-long-aozhejiang-university/

March 31, 2015, at 10:31 PM by 83.115.252.233 -

Added lines 310-318:

> intégré au ''/etc/rc.local'' :
[@
# ======================================================
# LIGHTTPD FIX
# ======================================================
mkdir /var/log/lighttpd
chown www-data. /var/log/lighttpd
@]

March 31, 2015, at 10:26 PM by 83.115.252.233 -

Changed line 137 from:

aptitude purge ics-dhcp-server

to:

aptitude purge isc-dhcp-server

Changed lines 285-288 from:

E/C de résolution

!!! SSH
Problème de connexion après 1/2 jours, pour tous les utilisateurs, avec selon le moment le msg suivant :

to:

Fixé par :

Changed line 287 from:

Connexion reset by pear

to:

aptitude purge isc-dhcp-server

Changed lines 289-292 from:

ou

to:

> Erreur de syntaxe dans la procédure d'install (corrigé)

!!! SSH
Problème de connexion après 1/2 jours, pour tous les utilisateurs, avec selon le moment le msg suivant :

Changed line 294 from:

Connexion closed by remote host

to:

Connexion reset by pear

Added lines 296-299:

ou
[@
Connexion closed by remote host
@]

March 31, 2015, at 10:23 PM by 83.115.252.233 -

Added lines 221-305:

!! TroubleShooting

!!! isc-dhcp-server

Erreurs rencontrées dans les logs

[@
dmesg
@]

Donne le résultat suivant :
[@
[ 12.650000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.690000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.730000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 16.080000] init: failsafe main process (413) killed by TERM signal
[ 16.310000] init: network-manager main process (639) terminated with status 127
[ 16.310000] init: network-manager main process ended, respawning
[ 18.270000] init: isc-dhcp-server main process (745) terminated with status 1
[ 18.270000] init: isc-dhcp-server main process ended, respawning
[ 18.740000] init: isc-dhcp-server main process (802) terminated with status 1
[ 18.740000] init: isc-dhcp-server main process ended, respawning
[ 19.050000] init: isc-dhcp-server main process (815) terminated with status 1
[ 19.050000] init: isc-dhcp-server main process ended, respawning
[ 19.290000] init: isc-dhcp-server main process (834) terminated with status 1
[ 19.290000] init: isc-dhcp-server main process ended, respawning
[ 20.050000] init: isc-dhcp-server main process (847) terminated with status 1
[ 20.050000] init: isc-dhcp-server main process ended, respawning
[ 20.270000] init: isc-dhcp-server main process (878) terminated with status 1
[ 20.270000] init: isc-dhcp-server main process ended, respawning
[ 21.020000] init: isc-dhcp-server main process (886) terminated with status 1
[ 21.020000] init: isc-dhcp-server main process ended, respawning
[ 21.740000] init: isc-dhcp-server main process (894) terminated with status 1
[ 21.740000] init: isc-dhcp-server main process ended, respawning
[ 21.910000] init: isc-dhcp-server main process (902) terminated with status 1
[ 21.910000] init: isc-dhcp-server main process ended, respawning
[ 22.130000] init: isc-dhcp-server main process (910) terminated with status 1
[ 22.130000] init: isc-dhcp-server main process ended, respawning
[ 23.950000] init: isc-dhcp-server main process (918) terminated with status 1
[ 23.950000] init: isc-dhcp-server main process ended, respawning
[ 24.140000] init: plymouth-upstart-bridge main process ended, respawning
[ 24.400000] init: isc-dhcp-server main process (938) terminated with status 1
[ 24.400000] init: isc-dhcp-server main process ended, respawning
[ 24.530000] init: isc-dhcp-server main process (951) terminated with status 1
[ 24.530000] init: isc-dhcp-server main process ended, respawning
[ 24.730000] eth0: no IPv6 routers present
[ 25.200000] init: isc-dhcp-server main process (959) terminated with status 1
[ 25.200000] init: isc-dhcp-server main process ended, respawning
[ 25.330000] init: isc-dhcp-server main process (967) terminated with status 1
[ 25.330000] init: isc-dhcp-server main process ended, respawning
[ 25.470000] init: isc-dhcp-server main process (975) terminated with status 1
[ 25.470000] init: isc-dhcp-server main process ended, respawning
[ 25.600000] init: isc-dhcp-server main process (983) terminated with status 1
[ 25.600000] init: isc-dhcp-server main process ended, respawning
[ 25.730000] init: isc-dhcp-server main process (991) terminated with status 1
[ 25.730000] init: isc-dhcp-server main process ended, respawning
[ 25.870000] init: isc-dhcp-server main process (999) terminated with status 1
[ 25.870000] init: isc-dhcp-server main process ended, respawning
[ 25.990000] init: isc-dhcp-server main process (1007) terminated with status 1
[ 25.990000] init: isc-dhcp-server main process ended, respawning
[ 26.120000] init: isc-dhcp-server main process (1015) terminated with status 1
[ 26.120000] init: isc-dhcp-server respawning too fast, stopped
@]

E/C de résolution

!!! SSH
Problème de connexion après 1/2 jours, pour tous les utilisateurs, avec selon le moment le msg suivant :
[@
Connexion reset by pear
@]
ou
[@
Connexion closed by remote host
@]
E/C de résolution

!!! Lighttpd
Problème de création du fichier ''/var/log/lighttpd/error.log'' au démarrage du service
[@
mkdir /var/log/lighttpd
chown www-data. /var/log/lighttpd
service lighttpd start
@]

March 13, 2015, at 08:59 AM by 83.115.99.222 -

Changed line 209 from:

aptitude install php5-cli php5-sqlite

to:

aptitude install php5 php5-cli php5-sqlite

March 12, 2015, at 11:33 PM by 83.115.99.222 -

Changed lines 186-187 from:

to:

# > https://www.howtoforge.com/installing-lighttpd-with-php5-php-fpm-and-mysql-support-on-debian-wheezy

March 12, 2015, at 11:15 PM by 83.115.99.222 -

Added lines 206-211:

# Install stuff for teleinfo-edf scripts
aptitude install php5-cli php5-sqlite
# Configure teleinfo-edf device ($dev var)
vim teleinfo_func.php

March 12, 2015, at 09:28 PM by 83.115.99.222 -

Changed line 192 from:

# enable UART on gpio0(RX) & gpio1(TX)

to:

# enable UART on gpio0(RX) & gpio1(TX) - "on the fly method"

Added lines 199-205:

# =======================================
# Configure /dev/ttyS1 for TELEINFO-EDF
# =======================================
# In /etc/rc.local, add following lines
# > /opt/setuart2 on
# > stty -F /dev/ttyS1 1200 sane evenp parenb cs7 -crtscts
# =======================================

March 12, 2015, at 08:13 PM by 83.115.99.222 -

Changed lines 197-198 from:

to:

# @see http://forum.linksprite.com/index.php?/topic/3567-uart-problems/

March 12, 2015, at 04:30 PM by 83.115.99.222 -

Added lines 192-197:

# enable UART on gpio0(RX) & gpio1(TX)
echo "3" > /sys/devices/virtual/misc/gpio/mode/gpio0
echo "3" > /sys/devices/virtual/misc/gpio/mode/gpio1
# to enable definitely UART on /dev/ttyS1 : compile setuart2.c (gcc -o setuart2 setuart2.c) and call it in /etc/rc.local
# @see https://github.com/lightisright/rpi-stuff.git (pcduino directory)

March 12, 2015, at 03:59 PM by 83.115.99.222 -

Changed lines 187-191 from:

to:

# enable GPIO
modprobe gpio # now you should see /sys/devices/virtual/misc/gpio/*
echo "gpio" >> /etc/modules # verify that /etc/modules last line is "gpio" with `tail -n 2 /etc/modules`
shutdown -r now # check that gpio module is loaded after reboot : `lsmod | grep gpio`

March 12, 2015, at 02:14 PM by 83.115.99.222 -

Added lines 8-9:

Attach:pcduino-pining.jpg

March 12, 2015, at 01:40 PM by 92.154.160.163 -

Changed lines 202-203 from:

to:

* [[Serial communications on PcDuino -> https://learn.sparkfun.com/tutorials/programming-the-pcduino/serial-communications]]

March 04, 2015, at 10:45 PM by 90.51.71.245 -

Added lines 182-185:

# lighttpd + php
aptitude install lighttpd php5-fpm

March 04, 2015, at 08:30 PM by 90.51.71.245 -

Changed lines 174-181 from:

aptitude install sysv-rc vim

to:

aptitude install sysv-rc vim

# mise à l'heure
aptitude install ntp ntpdate
service ntp stop
ntpdate ntp.unicaen.fr
service ntp start

February 26, 2015, at 09:39 PM by 90.51.71.245 -

Changed line 79 from:

# > clavier FR

to:

# > clavier FR (ou utiliser la commande 'dpkg-reconfigure keyboard-configuration')

Deleted lines 82-86:

# passer le clavier en FR si non fait au dessus
dpkg-reconfigure keyboard-configuration

# Commenter les dépôts www.wiimu.com (très très lent pour des plugins graphiques uniquement) dans /etc/apt/source.list

Changed lines 85-86 from:

apt-get install aptitude

to:

apt-get install aptitude vim

# Commenter les dépôts www.wiimu.com (très très lent pour des plugins graphiques uniquement) dans /etc/apt/source.list
vim /etc/apt/source.list

Changed lines 94-98 from:

aptitude purge x11-aptitude purge lightdm x11-xserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switchxserver-utils libglib2.0-bin libgtop2-7 libgtop2-common libstartup-notification0 libxcb-util0 xfonts-base xfonts-utils libxfont1 libxkbfile1 xfonts-encodings xorg-docs-core

# > pour finir le travail : ouvrir "aptitude" et supprimer les paquets inutiles

# suppression gestionnaire réseau

to:

# suppression gestionnaire réseau (le réseau sera reconfiguré après)

Changed lines 98-110 from:

# config réseau manuelle
echo "iface eth0 inet dhcp" > /etc/network/interfaces
/etc/init.d/networking restart

# ssh
apt-get install aptitude ssh
# A tester : sed -ri s/PermitRootLogin yes/PermitRootLogin no/

# date et heure

# utilitaires de base
aptitude install sysv-rc vim

to:

# A tester
# apt-get purge x11* server-x11*
# apt-get autoremove
# dpkg --get-selections | grep deinstall | cut -f1 | xargs dpkg -P
aptitude purge x11-aptitude purge lightdm x11-xserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switchxserver-utils libglib2.0-bin libgtop2-7 libgtop2-common libstartup-notification0 libxcb-util0 xfonts-base xfonts-utils libxfont1 libxkbfile1 xfonts-encodings xorg-docs-core

# > pour finir le travail : ouvrir "aptitude" et supprimer les paquets inutiles

Added lines 141-145:

# Purge des paquets de langue chinois (gnome + ...), x11, gnome
aptitude purge ~i ~n .*-zh-*
aptitude purge ~i ~n .*x11.*
aptitude purge ~i ~n .*gnome.*

Changed lines 149-152 from:

# Purge des paquets de langue chinois (gnome + ...)
aptitude purge ~i ~n .*-zh-*
# Purge des derniers paquets X11
aptitude purge ~i ~n .*X11.*

to:

# modification du nom de l'hôte par défaut (ubuntu) en "pcduino"
sed -ri s~ubuntu~pcduino~ /etc/hostname
sed -ri s~ubuntu~pcduino~ /etc/hosts

Added lines 155-160:

# backup du système propre
board-config.sh
> backup SD
@]

[@

Added lines 164-174:

# config réseau manuelle
echo "iface eth0 inet dhcp" > /etc/network/interfaces
/etc/init.d/networking restart

# ssh
aptitude install ssh
# A tester : sed -ri s/PermitRootLogin yes/PermitRootLogin no/

# utilitaires de base
aptitude install sysv-rc vim

February 26, 2015, at 09:25 PM by 90.51.71.245 -

Added lines 154-158:

# Purge des paquets de langue chinois (gnome + ...)
aptitude purge ~i ~n .*-zh-*
# Purge des derniers paquets X11
aptitude purge ~i ~n .*X11.*

February 26, 2015, at 09:12 PM by 90.51.71.245 -

Added lines 151-153:

# suppression du cache d'aptitude
aptitude autoclean

February 26, 2015, at 09:08 PM by 90.51.71.245 -

Added lines 137-158:

[@
# changement du mot de passe root
passwd

# suppression de l'auto-login en root
rm /etc/init/openvt.conf

# suppression du réseau USB
aptitude purge ics-dhcp-server
rm /etc/init.d/auto-serial-console.conf

# Supprimer / commenter l'appel au script enable_otg (ligne 21) et le démarrage du réseau USB avec ''dhcpd'' (ligne 25)
vim /etc/rc.local
@]

[@
# ajout d'un utilisateur
adduser %USER%
password %USER%
@]

February 26, 2015, at 07:47 PM by 90.51.71.245 -

Added lines 140-142:

J'ai dû utiliser LiveSuit sur une vieille VM sour XP (impossible de faire reconnaitre le PcDuino sur un Windows Seven - driver incompatible il me semble) sans oublier d'utiliser le firmware spécifique pour LiveSuit (ne pas utiliser celui pour ''dd'').
On peut ensuite tout reprendre à 0 : installation d'Ubuntu 12.07 puis suppression de l'interface graphique puis upgrade vers Ubuntu 14.04

February 26, 2015, at 07:40 PM by 90.51.71.245 -

Changed lines 6-7 from:

to:

* Ubuntu server sur PcDuino : http://www.ertai.nl/node/42

February 23, 2015, at 11:06 PM by 92.154.224.168 -

Changed lines 75-82 from:

# passer le clavier en FR

to:

# Modifier les préférences de base
board-config.sh

# > clavier FR
# > timezone Paris
# > boot CLI

# passer le clavier en FR si non fait au dessus

Added lines 85-86:

# Commenter les dépôts www.wiimu.com (très très lent pour des plugins graphiques uniquement) dans /etc/apt/source.list

Changed lines 89-93 from:

# ssh
apt-get install aptitude ssh
# A tester : sed -ri s/PermitRootLogin yes/PermitRootLogin no/

to:

apt-get install aptitude

Added lines 94-99:

aptitude purge abiword pcduino-xbmc
aptitude purge x11-aptitude purge lightdm x11-xserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switchxserver-utils libglib2.0-bin libgtop2-7 libgtop2-common libstartup-notification0 libxcb-util0 xfonts-base xfonts-utils libxfont1 libxkbfile1 xfonts-encodings xorg-docs-core

# > pour finir le travail : ouvrir "aptitude" et supprimer les paquets inutiles

# suppression gestionnaire réseau

Changed lines 101-106 from:

aptitude purge x11-aptitude purge lightdm x11-xserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switchxserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switch
libglib2.0-bin libgtop2-7 libgtop2-common libstartup-notification0 libxcb-util0 xfonts-base xfonts-utils libxfont1 libxkbfile1 xfonts-encodings xorg-docs-core

# > pour finir le travail : ouvrir "aptitude" et supprimer les paquets inutiles

# config réseau

to:

# config réseau manuelle

Added lines 106-109:

# ssh
apt-get install aptitude ssh
# A tester : sed -ri s/PermitRootLogin yes/PermitRootLogin no/

February 21, 2015, at 09:45 AM by 92.154.224.168 -

Added lines 124-126:

!! Mise à jour suite plantage
http://castman.unblog.fr/2014/01/08/procedure-de-maj-du-kernel-et-de-lubuntu-sous-pcduino-v2-suite-a-un-plantage/

February 21, 2015, at 09:19 AM by 92.154.224.168 -

Added lines 105-123:

!! Passage en Ubuntu 14.04 (Trusty)

Au préalable, backuper la NAND sur la micro-SD :
[@
board-config.sh
@]

Mettre à jour le système actuel (precise) :
[@
aptitude update
aptitude upgrade
@]

Dans ''/etc/apt/sources.list'', remplacer 'precise' par 'trusty' puis lancer la mise à jour :
[@
aptitude update
aptitude upgrade
@]

February 20, 2015, at 12:10 AM by 92.154.224.168 -

Changed lines 90-91 from:

to:

libglib2.0-bin libgtop2-7 libgtop2-common libstartup-notification0 libxcb-util0 xfonts-base xfonts-utils libxfont1 libxkbfile1 xfonts-encodings xorg-docs-core

February 20, 2015, at 12:00 AM by 92.154.224.168 -

Added lines 91-92:

# > pour finir le travail : ouvrir "aptitude" et supprimer les paquets inutiles

February 19, 2015, at 11:56 PM by 92.154.224.168 -

Added line 86:

/etc/init.d/lightdm stop

February 19, 2015, at 11:54 PM by 92.154.224.168 -

Changed lines 88-89 from:

aptitude purge x11-aptitude purge x11-xserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switchxserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switch

to:

aptitude purge x11-aptitude purge lightdm x11-xserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switchxserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switch

February 19, 2015, at 11:53 PM by 92.154.224.168 -

Added line 78:

# update

Changed lines 80-81 from:

apt-get install aptitude ssh-server

to:

# ssh
apt-get install aptitude ssh
# A tester : sed -ri s/PermitRootLogin yes/PermitRootLogin no/

Changed lines 86-90 from:

aptitude remove xserver-xorg-core
aptitude remove network-manager network-manager-gnome

# date et heure

to:

aptitude purge xserver-xorg-core
aptitude purge network-manager network-manager-gnome
aptitude purge x11-aptitude purge x11-xserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switchxserver-utils x11vnc lxterminal lxsession lxrandr lxlauncher lxpanel openbox xbmc lubuntu-* xscreensaver xauth x11-xkb-utils lubuntu-default-settings gtk2-engines-murrine gtk3-engines-unico im-switch

Changed lines 91-93 from:

# ssh

to:

echo "iface eth0 inet dhcp" > /etc/network/interfaces
/etc/init.d/networking restart

# date et heure

February 19, 2015, at 11:24 PM by 92.154.224.168 -

Added lines 65-95:

!! 1er Boot Ubuntu

Taper CTRL+ALT+F1 pour passer en mode console.

Le but est de retirer :
* X
* les paquets qui ne servent à rien pour faire de la place
* évaluer l'espace disque disponible sur la NAND

[@
# passer le clavier en FR
dpkg-reconfigure keyboard-configuration

apt-get update
apt-get install aptitude ssh-server

# récupération d'espace disque
aptitude remove xserver-xorg-core
aptitude remove network-manager network-manager-gnome

# date et heure

# config réseau

# ssh

# utilitaires de base
aptitude install sysv-rc vim

@]

February 19, 2015, at 10:37 PM by 92.154.224.168 -

Changed lines 53-55 from:

# démonter la carte SD
sudo umount $SDDEV

to:

# au besoin formatez votre carte SD avec GParted (ou autre)

Changed lines 56-59 from:

sudo dd if=pcduino_ubuntu_20131126.img of=$SDDEV bs=1M
sudo sync

to:

cp pcduino_ubuntu_20131126.img update.sh /media/le-point-de-montage-de-votre-carte-sd

# Allumez votre PcDuino
# L'écran doit à ce moment chercher une carte SD ou clé USB contenant une image (fichier *.img) et un fichier "update.sh"
# Reconnecter la carte SD au PcDuino
# Attendre 10mn comme demandé que l'update se termine
# Retirer la carte SD et rebooter le PcDuino

February 19, 2015, at 10:03 PM by 92.154.224.168 -

Changed lines 22-23 from:

dmesg

to:

tail /var/log/syslog

Changed lines 25-26 from:

to:

# > Feb 19 23:01:10 mycomputer udisksd[2581]: Mounted /dev/sdj1 at /media/userxxx/9016-4EF8 on behalf of uid 1000

Changed lines 28-29 from:

SDDEV=/dev/xxx

to:

SDDEV=/dev/sdj1

February 19, 2015, at 09:51 PM by 92.154.224.168 -

Changed lines 15-16 from:

to:

unzip pcduino_a10_kernel_dd_20150211.zip

Changed lines 19-20 from:

to:

7zr e pcduino_ubuntu_20131126.7z

Changed lines 29-30 from:

SDMNT=/media/yyy

to:

Changed lines 31-32 from:

sudo umount $SDMNT

to:

sudo umount $SDDEV

Changed lines 34-35 from:

sudo dd if=pcduino_a10_kernel_dd_20150211.zip of=$SDDEV bs=1M

to:

sudo dd if=pcduino_a10_kernel_dd_20150211.img of=$SDDEV bs=1M
sudo sync

Changed lines 49-60 from:

to:

# Une fois la mise à jour du kernel réalisée
# Eteindre le PcDuino
# Reconnecter la carte SD à votre PC (on présume qu'elle aura été réinsérée dans le même lecteur / même emplacement)

# démonter la carte SD
sudo umount $SDDEV

# copie de l'image d'Ubuntu sur la carte SD
sudo dd if=pcduino_ubuntu_20131126.img of=$SDDEV bs=1M
sudo sync

February 19, 2015, at 09:44 PM by 92.154.224.168 -

Changed lines 19-47 from:

to:

# Insérer la carte SD dans votre lecteur et repérer les points de montage / identifiants des devices
dmesg

# ici la ligne qui nous permet d'identifier la carte SD est la suivante (noter le device) :

# Initialiser le nom du device
SDDEV=/dev/xxx
SDMNT=/media/yyy

# démonter la carte SD
sudo umount $SDMNT

# copie de l'image du kernel sur la carte SD
sudo dd if=pcduino_a10_kernel_dd_20150211.zip of=$SDDEV bs=1M

# Débrancher le PcDuino
# Retirer la carte SD de votre PC
# Insérer la carte SD dans le PcDuino
# Brancher le PcDuino
# ...
# Le clignotement des voyants RX/TX vous indiquera les opérations en cours de réalisation :
# RX | TX | Operation detail
# blinking slow | no blinking | system boot succeed, checking update package from sdcard and udisk
# blinking fast | no blinking | updating from sdcard/udisk
# blinking fast | blinking fast | update failed
# blinking slow | blinking slow | update succeed

February 19, 2015, at 09:32 PM by 92.154.224.168 -

Changed line 11 from:

Pour une installation le 19 février 2015 d'Ubuntu sur la NAND :

to:

Pour une installation le 19 février 2015 '''d'Ubuntu sur la NAND''' :

February 19, 2015, at 09:32 PM by 92.154.224.168 -

Changed lines 1-2 from:

! PcDuino

to:

! PcDuino v2

Changed lines 7-8 from:

!! Installation d'Ubuntu sur la NAND

to:

!! Installation

Changed lines 11-14 from:

Pour une installation le 19 février 2015, télécharger le
* [[https://s3.amazonaws.com/pcduino/Images/v2/pcduino_a10_kernel_dd_20150211.zip | kernel]]
* [[https://s3.amazonaws.com/pcduino/Images/2013-11-26/pcduino_ubuntu_20131126.7z | l'image d'Ubuntu]]

to:

Pour une installation le 19 février 2015 d'Ubuntu sur la NAND :
[@
# téléchargement de l'image du kernel
wget https://s3.amazonaws.com/pcduino/Images/v2/pcduino_a10_kernel_dd_20150211.zip

# téléchargement de l'image d'ubuntu
wget https://s3.amazonaws.com/pcduino/Images/2013-11-26/pcduino_ubuntu_20131126.7z

@]

February 19, 2015, at 09:30 PM by 92.154.224.168 -

Added lines 7-14:

!! Installation d'Ubuntu sur la NAND

Un tuto clair en 20 lignes car ce n'est pas monnaie courante sur le site de linksprite.

Pour une installation le 19 février 2015, télécharger le
* [[https://s3.amazonaws.com/pcduino/Images/v2/pcduino_a10_kernel_dd_20150211.zip | kernel]]
* [[https://s3.amazonaws.com/pcduino/Images/2013-11-26/pcduino_ubuntu_20131126.7z | l'image d'Ubuntu]]

January 29, 2015, at 07:52 PM by 86.215.34.154 -

Changed lines 5-6 from:

to:

* [[Guide Club-Elec -> http://www.mon-club-elec.fr/pmwiki_mon_club_elec/pmwiki.php?n=MAIN.PCDUINO]]

January 29, 2015, at 07:41 PM by 86.215.34.154 -

Changed lines 4-5 from:

to:

* [[Doc complète (PDF) -> https://s3.amazonaws.com/pcduino/book/Introduction+to+pcDuino.pdf]]

January 29, 2015, at 07:40 PM by 86.215.34.154 -

Added lines 3-4:

* [[Quick start (linksprite) -> http://www.linksprite.com/?page_id=874]]

Added line 9:

Added line 11:

* [[Images form PcDuino v2 (linksprite) -> http://www.linksprite.com/?page_id=852]]

January 29, 2015, at 07:38 PM by 86.215.34.154 -

Changed lines 3-9 from:

* [[Hardware / Pining (official) -> http://www.pcduino.com/chapter-1-hardware-and-software-introductions-of-pcduino/]] - [[PDF -> https://s3.amazonaws.com/pcduino/Hardware/PC+Duino_V01-20130128.pdf]]

to:

!! Hardware
* [[Hardware / Pining (official) -> http://www.pcduino.com/chapter-1-hardware-and-software-introductions-of-pcduino/]] - [[PDF -> https://s3.amazonaws.com/pcduino/Hardware/PC+Duino_V01-20130128.pdf]]

!! OS
* [[Build my own kernel for PcDuino (official) -> http://www.pcduino.com/how-to-build-kernel-for-pcduino/]]

January 29, 2015, at 07:37 PM by 86.215.34.154 -

Added lines 1-3:

! PcDuino

* [[Hardware / Pining (official) -> http://www.pcduino.com/chapter-1-hardware-and-software-introductions-of-pcduino/]] - [[PDF -> https://s3.amazonaws.com/pcduino/Hardware/PC+Duino_V01-20130128.pdf]]

Mon pense bête...

Pc Duino

RaspberryPi.PcDuino History